Best Pond Pumps for Your Garden in the UK

The Hozelock 1805 1240 Air Pump is designed for densely stocked, medium-sized ponds when the greater flow rate is a priority.

The efficiency of this model is 640 LPH. That is enough to oxygenate and make the water healthier in a medium pond (approximately 4500L). You can also adjust the flow rate with the control located on the top of the pump and increase the flow in cold weather. This helps prevent water from freezing when the temperature is below zero. It is also advised to raise the air stones up from the bottom in winter so that the pump won’t circulate very cold water.

With a user's convenience in mind, the manufacturer has made this model fully waterproof, allowing you to install it out in the open terrain without worrying it may fail if get wet. The only inconvenience might occur if you are going to install the pump far from the mains since the length of the cable is 3 m only. You can connect the extension cable if you need to, just don’t forget to use a waterproof connector. These Hozelock pond pumps come with quite a long airline (10m), so installation will be simple. Plus, the optimal depth for the air stones is 1.2 m, so the extra 8 m of the airline compensate the lack of the length of the cable.

In other words, the Hozelock Air Pump is a pretty powerful and efficient machine made to oxygenate a medium pond effectively and with minimal costs. So, if you are looking for a truly reliable device to keep your pond in good condition, this model is the right choice.

The Blagdon 2872 Pond Air 2 Pump System is specially designed and tested to fill an average (4500 L) pond and aerate it efficiently. Produced from high-quality materials, this model is made to last and help you keep your pond clean 365 days a year.

This is an external model for indoor use only. This means you will need to install the main unit inside your shed or garage, for example. A great model for those gardeners whose pond is located near the house.

Since the efficiency of such equipment is usually a priority, the manufacturer has made this pump quite productive. With a power consumption of 5W, this model features 5.5 LPM output flow rate, which is a pretty high index for such an energy-efficient pump.

In order to guarantee the better oxygenation and circulation of water, the Blagdon pond pump can be installed at a greater depth than some of its analogues. So, if your pond is quite deep, you can immerse the air stones up to 1.4 m, raising them higher for winter time (at least 30 cm from the bottom).

As for the maintenance, it is pretty simple, since you only need to replace the air filter every 3-4 months. The pump mechanism is also easy to maintain because you don’t have to oil it and can get any spares from your local retailer easily. So, basically, after you install your Blagdon pond pump, all you need to do is feast your eyes on it, sitting in your garden chair with a glass of cold refreshing drink. Sounds great, isn't it?

There are no doubts that the best household appliance that we use either at home or in the garden is the one that performs great and at the same time is energy efficient. What if we tell you about the garden pond pump that will cost you almost nothing after its installation? Sounds tempting? Well, with this solar powered pond pump by PowerBee, it becomes possible.

It's designed to produce 120 LPH or 2 LPM which is enough to oxygenate a small fishpond, making it healthier for its habitats. Although it doesn’t have a filtration system, this pump can make the water in your pond cleaner because oxygen promotes the growth of healthy bacteria. They replace Ammonia with Nitrate, hence, creating a healthier environment in the pond.

As this model uses the solar energy as a power source, it should be installed in an open area with the solar module facing south toward the sun. By the way, since it works well even in cloudy weather, you can be sure that your pond will be aerated from very early morning until evening.

It won’t be a challenge to install the system either. All you need to do is mount the panel on a spike sidelong of the pond, connect it to the oxygenator with a cable, hook up the air hose and immerse the air stone in the water. This solar pond pump will do everything else for you.

If you would like to have an effective pond pump and its low-cost maintenance is your priority, we would like to introduce the All Pond Solutions AP-3 to you.

This is a nicely-made pump that can oxygenate a small pond easily with little power consumption (just 3W per hour) and an average efficiency of 180LPH. The manufacturer has also extended its options a little by offering you to use the AP-3 pump in your aquarium as well.

This model features two outlets that produce 1.5 LPM each. You can control the flow rate with the regulator on the back of the housing, which is very convenient especially when you apply the pump for your aquarium. In addition to flow rate control, this pump works pretty quietly, thus, letting you avoid extra stress for your fish.

The AP-3 is also very simple to install. It comes with everything you need - two ceramic air stones for better aeration, 4m airline, and two non-return valves which help minimise the chance of water running backup. In case the length of the airline is not enough for your pond or aquarium, you can get the longer one. An average 6mm aquarium hose works just fine.

Overall, the AP-3 pond pump is a decent model in its price range. It works well and can really reduce your electricity bills.

Obviously, every gardener who owns a fishpond lays his or her personal demands for its maintenance. While for some users an efficient and powerful pump is the priority, for others, it is the energy efficiency that really matters. With the Woodside W217, you get all!

For starters, this solar pond pump is pretty durable and requires almost no time for its maintenance. You just need to install the unit properly according to the instructions from the manual and entrust the W217 care for your pond. Also, it comes with two airlines which flow rate is 90LPM each, so you can use them to oxygenate a small pond with fish without any worry that you might need to get a spare aerator.

Since this model is designed to use the solar energy as a power source, it should be installed above the ground. The solar panel comes with a ground spike, thus, you will just need to find the best location for the panel so that the sun shines on it all day long and spike it into the ground.

Also, according to the majority of the customers, the Woodside W217 Solar Oxygenator performs much better in a sunny weather but its efficiency reduces slightly on a cloudy day.

In conclusion, we would like to say that this solar powered pond pump by Woodside is the system you can fully trust you fishpond since with its help, keeping a pond clean and healthy is simpler than ever. Plus, it is completely costless. What else to wish for?